产品中心
PRODUCT DESCRIPTION 产品介绍
XM-4CL-5 is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms. XM-4CL-5 can be applied in master patterns, concept models, general parts and functional prototypes in the field of shoe material.The parts duability building with XM-4CL-5 is over 6.5months.XM-4CL-5 是一种具备精确和耐久特性的类ABS的立体光造型树脂。它被用于固态激光的光固化成型法。XM-4CL-5可应用于于鞋材的母模,概念模型,一般部件,功能性部件的制作。用XM-4CL-5树脂制造的部件的耐久性长达6.5个月以上。
TYPICAL FEATURES典型特点
-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines 中等粘度的液态树脂,确保其更容易涂层以及清洗部件和机器
-Improved strength retained, improved dimensions retention of parts in humid condition 在潮湿环境中具有更好的强度及尺寸保持特性
-need minimal part finishing只需要极小的部件修饰
-Long shelf life in machine更长的实际使用期限
TYPICAL BENEFITS典型优点
-Need less part finishing time,easier post-curing 更少的部件完成时间
-Buliding accurate parts with an improved dimensional stability 能够建造精确的部件并提高了部件的尺寸稳定性
Appearance外观 |
Red红色 |
Density 密度 |
1.11~1.15g/cm3 @ 25 ℃ |
Viscosity 粘度 |
450~550 cps @ 23℃ |
Dp 固化深度 |
0.13~0.15 mm |
Ec 临界曝光量 |
7.0~8.5 mJ/cm2 |
Building layer thickness 建造层厚 |
0.05~0.12mm |
MEASUREMENT测试项目 |
TEST METHOD 测试方法 |
VALUE 数值 |
|
|
90-minute UV post-cure 90分钟紫外固化 |
Hardness 硬度, Shore D |
ASTM D 2240 |
75~90 |
Flexural modulus 弯曲模量, Mpa |
ASTM D 790 |
2,505-2,655 |
Flexural strength 弯曲强度, Mpa |
ASTM D 790 |
72- 77 |
Tensile modulus 拉伸模量, MPa |
ASTM D 638 |
2,601-2,750 |
Tensile strength 拉伸强度, MPa |
ASTM D 638 |
40-57 |
Elongation at break 断裂延长率 |
ASTM D 638 |
3 -7% |
Poisson`s Ratio泊松比 |
ASTM D 638 |
0.38-0.42 |
Impact strength notched Izod, J/m 缺口冲击强度 |
ASTM D 256 |
12 - 22 |
Heat deflection temperature, ℃ 热变形温度 |
ASTM D 648 @66PSI
|
75~83
|
Glass transition,Tg 玻璃化转变温度,℃ |
DMA,E”peak |
80~89 |
Coefficient of thermal expension,热膨胀系数, /℃ |
TMA(T |
85~99*E-6 |
Density 密度, g/cm3 |
|
1.12~1.18 |
Dielectric Constant介电常数 60 Hz |
ASTM D 150-98
|
4.1~5.0
|
Dielectric Constant介电常数 1 kHz |
ASTM D 150-98
|
3.3~4.2
|
Dielectric Constant介电常数 1 MHz |
ASTM D 150-98
|
3.1~4.0
|
Dielectric Strength绝缘强度 kV/mm |
ASTM D 1549-97a
|
12.8~16.8 |
注:XM-4CL-5使用及保存温度不宜过高,请在25摄氏度以下使用;使用及保存的相对湿度必须在38RH%以下。